Home decoration small dictionary decoration TX please "charge"

2021-04-25

Plastic composite steel plate It is a soft or semi-rigid polyvinyl chloride plastic film covered with 0.2-0.4mm on steel plate or pressed steel plate, divided into two kinds of single-sided and double-sided coating. It has the characteristics of insulation, wear resistance, corrosion resistance, oil resistance, etc. It can be used for wall panels and roof panels.
The veneer is a thin slice that is sliced ​​or peeled with natural wood, and is then affixed to the plywood, fiberboard, particle board, etc., after being applied. This material has a clear texture and natural color and is a higher-grade decorative material.
It is made of high-pressure polyethylene as the base material, adding a lot of light calcium carbonate and a small amount of auxiliaries, and then it is made by plasticizing, hot pressing, foaming and other technological processes. This plate is lightweight, soundproof, heat-insulating and moisture-proof. Mainly used for ceiling surface materials.
Medium Density Fiberboard Density Fiberboard is a kind of artificial board. It takes plant fibers as raw materials, cuts chips, separates fibers, forms slabs (mixed with resin glue and additive paving), and under heat pressure, makes cellulose and half A plate formed by the plasticization of cellulose and lignin.
Fiberboard is divided into three types: hard fiberboard, semi-rigid fiberboard, and soft fiberboard. Hard fiberboard is mainly used for the panel of the ceiling and partition wall. The board surface is drilled to form various patterns. The surface is sprayed with various paints, and the decorative effect is better. Hard fiberboard sound absorption, waterproof performance, durable, easy construction.
Yellow pineapple wood is shiny, the rings are clear and even, the material is soft, easy to dry, processing, material color, pattern are very beautiful, paint and cementation performance is good, not easy to crack, corrosion resistance is good, is the material of high-grade furniture.
Aroma of wood, can be antiseptic, pest control, slightly lighter material, not easily deformed, easy processing, smooth cut surface, beautiful color after painting.
Hard wood, hard, large ratio, high strength, dense structure. It is resistant to moisture, abrasion, and is not easy to be cemented. It has good coloring properties, rough texture, and relatively thick tracheids. It has obvious wooden rays and is not easy to dry. Generally, it can be made of wood flooring or furniture.
Ash material is slightly hard, beautiful pattern, corrosion resistance, good water resistance, easy processing, high toughness, cemented paint, good coloring performance, good decorative performance, is a kind of wood used in the current decorative materials.
The melamine board full name is a melamine impregnated paper film facing panel. The paper is made of melamine resin adhesive soaked in paper with different colors or textures, and then dried to a certain degree of curing, and it is paved on the surface of particleboard, medium-density fiberboard or hardboard, and the hot-pressed decorative board.
The main raw materials of PE calcium plastic plate and calcium plastic plate are resin, filler and foaming agent. It is a raw material plastic mixing machine to uniformly press out the sheet material in the mold expander to expand the heat to open the mold, the sheet material immediately expanded into calcium plastic foam board. The expansion of the expansion of the long-expansion 1.7 times the thickness of the expansion of 2 times. The foamed sheet in the hot mold was immediately vacuum hot formed. Specifications are generally 500mm × 500mm, thickness 6mm.
Aluminium-plastic board It is based on high-pressure polyethylene as a base material, adding a large amount of aluminum hydroxide and an appropriate amount of flame retardant, and is made by plasticizing, hot pressing, foaming and other technological processes. This plate is lightweight, soundproof, heat-insulating and moisture-proof. Mainly used for ceiling and wall surface materials.
Plywood (plywood)
The plywood is a three- or multi-layer plate-like material obtained by peeling a veneer into a veneer or a wood veneer, and then bonding it with an adhesive. Three or more layers of plate-shaped material are generally used, and odd-numbered veneers are generally used, and adjacent veneers are formed. The fiber direction is perpendicular to each other and the front and the inner plates are arranged symmetrically on both sides of the center layer or the core.
Thin wood plywood Ash, willow wood, color wood, birch and other 0.1-0.5mm thick thin slices, plywood as a substrate made of glue, its beautiful pattern, good decoration.
The material of Liu'an wood is light and heavy, with a slightly thick structure, easy processing, good cementation performance, slight warping and cracking in the drying process, and is mostly used for making plywood or penta-plywood.
The pine material is loose, light, easy to dry, easy to process, rough cut surface, medium strength, easy to split, good adhesive performance, it is currently used mid-range wood.
Eucalyptus wood is shiny, with slightly thick structure, slow drying speed, not easy to warp, easy to process, strong nails.
Eucalyptus wood is softer, has grease, is wear-resistant, corrosion-resistant, is not easy to crack, has fine wood grain, is easy to process, and has strong toughness. The scope of application is relatively wide, and it can be used to make decorative materials such as wood lines, blockboards, and wood crafts.
The mahogany material is hard, not easy to process, difficult to dry, strong in holding nails, and has good cementation and paint performance. Suitable for decorative plates and high-grade furniture.
Sugarcane bagasse is sugarcane bagasse, which is a residue after sugar refining. The chemical composition of sugarcane bagasse is similar to that of wood. It is a good raw material for making plates. Due to the small proportion of bagasse, the fiber quality is good, and the strength of the prepared plate is high. Light weight, low water absorption. It is a medium-density chipboard with smooth surface, beautiful color, good dimensional stability, good mechanical processing performance and decorative performance.
Uses: Suitable for furniture, construction, carriages, ships, packing boxes and other production industries.
Gradual structure chipboard from the surface of the chipboard to the center, gradually changed from small to large wood shavings, no significant changes in the core layer, air flow paving machine installed. Smooth and smooth surface, high strength, good dimensional stability, good mechanical processing and surface decoration.
Directional Particleboard (OSB)
Oriented structure particle board is a kind of flake with 40mm, 70mm, width 5mm, 20mm, thickness 0.3mm, 0.7mm, and processed by special equipment with small diameter material, thinning material, wood core, board skin, branch material, etc. as raw materials. , sizing and special equipment A core-slab splicing plate is crisscrossed and oriented, and after being heat-pressed to form a man-made board. Because OSB uses a special process and many special equipment, it has the advantages of high bending strength, small linear expansion coefficient, good dimensional stability, strong nail holding force, easy surface decoration, etc. It is widely used in packaging, construction and vehicles. Shipbuilding and other industries.
Ash (White)
Tough and elastic, sapwood pale milky white, heartwood ranging from light brown to dark brown. Wood grain is obvious, coarse grain. Simple processing, easy to bend with steam method. Use luxury furniture, flooring, moldings, fine woodworking products, sports equipment, tool handles and so on.
Ash is tough and elastic, white or slightly pinkish. The processing is simple and it is easy to bend with the steam method, but it is apt to decay, so it is not easy to use for appearance.
Fire board Fire board is a decorative board made of silicon material or calcareous material as the main raw material, mixed with a certain proportion of fiber materials, lightweight aggregates, adhesives and chemical additives and made by autoclave technology. It is a new type of material that is being used more and more. Its use is not only due to fire protection. The construction of the fire board requires a relatively high requirement for glue sticking, and the fire board with better quality is also more expensive than the decorative panel. Fire board thickness is generally 0.8mm, 1mm and 1.2mm.
Daxinban Daxinban is a kind of special sandwich plywood. It is composed of wood strips with the same thickness and different lengths and arranged in close splicing. Generally, it is a five-layer structure. The vertical core plate (differentiated by the direction of the core material) has poor flexural compressive strength, but the transverse flexural compression strength is high.
Decorative panel decorative panels commonly known as panels. It is a veneer with a thickness of about 0.2mm, and a veneer with a single-sided decorative effect. It is a special way of plywood, with a thickness of 3%. Decorative panels are currently an advanced decoration material that is different from the oil mixing practice.
Plywood is also called plywood, and three or more layers of one-millimeter-thick veneer or sheet glue are hot-pressed. With light material, high strength, good elasticity and toughness, impact resistance and vibration, easy processing and finishing, insulation and other advantages.
Peachwood sapwood gray with brown, grayish brown core material.
Elm sapwood yellow and white, dark gray core material.
The surface of the three-layer structure particle board is made of thinner, smaller, specially-made mini shavings, and the core layer is made of thicker, larger rough shavings. Three paving heads are used.
Particle Board (Flakeboard)
Particle board, also known as particle board, is dried glue (such as wood shavings, flax, bagasse, etc.) made of wood shavings made of wood or non-wood plants that have been filled with rubber and auxiliary materials or have not been given rubber and auxiliary materials. Hot pressed sheet.
Particle board is classified as follows:
1, according to use points: divided into Class A particle board and B particle board;
2. According to the particle board structure: a. single-layer particle board; b. three-layer particle board; c. gradual structure particle board; d. oriented strand board; e. waffle particle board; f. molded particle board;
3, according to surface conditions: unfaced particle board: a. sanding particle board; b. not sanding particle board. Finishing chipboard: a. impregnated paper facing particleboard; b. decorative laminate facing particleboard; c. veneer facing particle board; d.
Surface finishing chipboard; e. PVC veneer particleboard, etc.
4, according to the use of raw materials points: a. wood chipboard; b. bagasse particleboard; c. flax particleboard; d. cotton stalk particle board; e. bamboo particle board, etc.; f. cement particleboard; g. gypsum particleboard; According to the manufacturing method: a.
Flat pressure particleboard; b. Extrusion particleboard.
Wiring board (Path)
Easy to move and reconfigure patch panel patch panels, patch cords, and backplane systems.
Cable
Sealing jackets with single or multiple wire connectors or fibers can be used individually or in groups.
Jump-connect box (Cross-Connect)
Is a mechanical structure, it is installed in the wall or rack, as the building cable management, adjustment and wiring. MINIMUM POINT OF ENTRY—refers to the nearest available point for a carrier device that has crossed a border line or the nearest available point to a point where multiple buildings or buildings are routed.
Adapter
It is a device used to match various types of plugs to each other or to the device's communication jack. It can also be used to rearrange leads, turn large logarithmic cables into small line groups, and connect cables to each other to bridge the wiring (BRIDGGED
TAP) Pairs on the same cable at several routing points can be reused at the distribution point.
Plastic plastic is a synthetic resin (high molecular polymer or prepolymer) as the main component, adding a variety of additives, plastic molding at a certain temperature and pressure, and at room temperature to maintain the same type of material.
Formaldehyde is a colorless, easily soluble, irritating gas. Formaldehyde can be absorbed through the respiratory tract and its aqueous solution “formalin” can be absorbed through the digestive tract. The main sources of formaldehyde are urea-formaldehyde resin volatiles in plywood, blockboard, medium density board, and particle board. And wall glue, chemical fiber carpets, foam plastics, paint coatings, etc.
Benzene is mainly derived from synthetic fibers, plastics, fuels, rubber, etc. It can inhibit the body's hematopoietic function, resulting in the reduction of white red blood cells and platelets.
Radon is the only natural radioactive gas produced by the decay of radium in nature. It has no color and no odor. The main source of granite, brick sand, cement, plaster and so on.
Xylene xylene belongs to aromatic hydrocarbons. People inhale high concentration of toluene or xylene in a short period of time. Symptoms of central nervous system anesthesia may appear. Lightness may cause dizziness, nausea, chest tightness, and fatigue. Severe coma may occur and even respiratory cycles may occur. It is depleted and dies, mainly from synthetic fibers, plastics, fuels, rubbers, etc., hidden in paints, various paint additives and various adhesives, waterproof materials, but also from the combustion of fuel and tobacco leaves.
Intelligent residential intelligent residential refers to the provision of high-tech and intelligent means for the service and management of residential communities in order to achieve fast and efficient service and management and provide a safe and comfortable home environment. The intelligent house must have the following characteristics: equipment intelligent automation system, communication automation system, office automation system, fire prevention automation system, security and security automation system.
Townhouse Residential
Townhouse consists of several or even a dozen or so low-rise dwellings that are less than or equal to 3 stories in parallel, with an area of ​​about 150-200 square meters.
Ecological residential ecological housing is guided by the idea of ​​sustainable development. It is intended to seek the harmony between nature, architecture, and people. That is, on the basis of “people-oriented”, using natural conditions and workers’ methods to create a benefit to people. A comfortable and healthy living environment, while controlling the use of natural resources, achieves a balance between natural demands and returns. The characteristics of an ecological home are summarized in four points: comfort, health, efficiency, and beauty.
A split-level residential split-level residence is an inconsistent height of an indoor floor, and the staggered place has stairs. The advantage is that it can be subdivided into motions and subdivisions like the climax, and because it is not completely divided into two floors, there is also a rich sense of space in a dwelling house.
Duplex dwellings are double-storey dwellings in a relatively high house. The upper part is the living room, and the lower part is the dining room, the kitchen, the bedroom, etc. The low part has the advantages and disadvantages of the new layer, and the high part is visually extensive. -
The thermocline residential climax residence is a leap-type building with more than one floor. It is also called the “building middle floor”.
Special structure This structure is also called spatial structure. It includes structural types such as suspension cables, grids, arches, and shells. Used in large public buildings.
Shear wall structure Shear wall is actually a cast-in-place reinforced concrete wall, which is mainly subjected to horizontal seismic loads. Such a horizontal load generates a horizontal shear force for walls and columns, and the shear wall structure is composed of vertical and horizontal walls. The directional force system is characterized by great rigidity and good spatial integrity. The room does not have exposed beams and column corners, which is convenient for indoor layout and easy to use.
The frame structure frame generally consists of beams, plates and columns. Its characteristic is that the framework structure is flexible, has a large indoor space, and is relatively easy to use. The floor of the frame structure is mostly made of cast-in-place reinforced concrete slabs, and the infill walls between the frames mostly use lightweight masonry walls.
Masonry structure is a widely used shear wall structure of multi-storey residential buildings. Reinforced concrete prefabricated floor slabs, roof panels are used as building and roof structural layers, and vertical load-bearing components are made of brick masonry.
FRP It is based on unsaturated polyester resin as a binder, glass fiber cloth as a reinforcing material, through the negative mold with a pattern. Features: Light weight, high strength, corrosion resistance, good decorative effect.
Plastic wallpapers Plastic wallpapers include plastic and wallpapers. Plastic wallpaper is based on wood pulp base paper, coated with vinyl chloride-vinyl acetate copolymer emulsion and titanium white, china clay, pigments, additives and other latex paint dubbed and then printed. PVC wallpaper is polyvinyl chloride resin and plasticizers, stabilizers, pigments, fillers by mixing, rolling into a film, and then with the paper-based hot-press composite, in the printing, embossed. Both have scrub resistance and good air permeability.
Spraying, roller coating This is the use of polymer cement mortar, by spraying mortar pump and spray gun (spray bucket) to spray the mortar on the wall surface for spraying; through the rubber roller to roll the polymer cement mortar on the wall surface out The pattern is roller paint.
Line plaster This is the use of molds or tools, first in the surface layer of mortar to make horizontal and vertical lines of decorative plastering, brush coating in a practice, the line may have a semicircular, corrugated, trapezoidal, rectangular and so on.
Facing Brick This is a kind of method of adding iron oxide yellow or iron oxide red and other pigments into the cement mortar to achieve the effect of imitating the decorative effect of the tile through manual operation.
Green Building Materials The so-called green building materials refer to the non-toxic, non-polluting, and human-friendly building materials that are produced by the use of clean production technologies, which use less natural resources and energy, and which use large amounts of industrial or municipal solid wastes. They have demagnetization, noise elimination, and adjustment. Light, temperature control, heat insulation, flame retardant, mildew-proof, antistatic, anti-radiation, and new building materials and their products that can be used to modulate the functions of the human body and adapt to intrinsic functions such as ergonomics.
Architectural decoration design refers to the act of beautifying architecture and architectural space. It is the key to the realization of the physical and spiritual functions of the material of the building.
It is based on the nature of the use of the building, the environment in which it is located, and the corresponding standards. It uses modern methods of materials, scientific and technological means, and artistic methods to create a function that is reasonable, comfortable and beautiful, and has a distinct personality. It conforms to the physiological and psychological needs of people and makes the user feel good. Pleasant, easy to learn, work, live and rest indoor and outdoor environment design.
Spanish pane panes Spanish panes, like those of ancient Chinese windows, have a lot more flavour than modern windows. The pane itself is very pleasing. A bunch of light rushes in and forms light, forming light and shadow, with a different kind of interesting, dramatic, and mysterious.
The entrance was originally referred to as the gate of Buddhism and now refers to the outer door of the hall, which is an area of ​​the residential population.
The soft entrance refers to a method of performing area processing on a flat surface such as a material. Divided into: smallpox division, wall division and ground division.
The entry to the half-separation portal may be a half or near-half design on the x-axis or y-axis. This design will reduce the probability of the above-mentioned matters to a certain extent. The semi-partitioned entrance may also use glass in the transparent part, although it is from the ground to the top because it is visually semi-blocked. Therefore, it is still classified as a semi-partitioned area.
The full partition entrance means that your entrance is designed to be full width. From the ground to the top. This entrance is designed to block sight.
The so-called “harmony room” in the room refers to a space that is decorated with natural wood and has a fixed function. There is very little furniture in this space. Because floors are floored or mats, everyone can sit on the floor. In this space, you can entertain, relax and read books. You can also use this space as a place for tea, drinking, and even playing mahjong.
Hidden engineering refers to the pipeline engineering and structural engineering hidden inside the decorative surface. Mainly includes six aspects: (1) water supply and drainage project; (2) electrical pipeline project; (3) floor base; (4) wall protection base; (5) door and window cover base;
(6) Ceiling basement.
The abbreviation of European style of European style is generally divided into Scandinavian style, Eastern European style and Central European style.
Management fees include rent, utilities, transportation, taxes, etc.
Design fee Measurement fee, project design fee, construction drawing design fee, and designer fee.
Main Material Fees Material costs for finished and semi-finished products such as flooring, paint and coatings, wooden doors, lamps, etc.
The DIN mark is a mark of the safety and quality certification of electrical and non-electrical products by the German standards committee.
The UL mark is a sign issued by a qualified laboratories of the United States after the quality certification of electrical products.
CCIB logo All imported electrical products that are sold on the Chinese market must be inspected by the China Import and Export Commodity Inspection Bureau and issued with the "CCIB" logo before they can be put on the market.
The thickness loss rate of the resilient carpet under dynamic load is expressed as the pressure after the carpet is pressurized for a certain period of time, and the thickness difference between the carpet and the unpressurized carpet is measured.
The number of abrasion-resistant carpets exposed to the backing under wear and tear under constant pressure. The abrasion resistance of carpets is related to the variety of raw materials and also related to the thickness of carpet weaving.
BVV
National wire standard code.
Toilets can be divided into two types: flush and siphon. According to the shape can be divided into conjoined and split two. The new toilet also features thermal insulation and cleansing.
Washbasins can be divided into hanging, column, desktop three.
Slip curtain rails are the most commonly used curtain rails in many types of pull-out blinds. Sliding rings of curtain rails are placed in slots in the rear of the curtain rails.
Ground decoration is an important part of the home. It is renovated, and it is mainly decorated in colors, textures, and other aspects.
Bao Qinggong users themselves to buy materials, workers to the construction, the cost paid to the decoration company.
The contracted materials will entrust the decoration company with the purchase of decorative materials. The three-story solid wood composite floor of the decoration company will be laminated with three layers of solid wood. The surface is made of high-quality hardwood specifications, and the core layer is softwood. The bottom layer is a rotary cut veneer. It overcomes one-way homogeneity, is not easily deformed, and has the characteristics of solid wood floors.
Composite floor composite flooring is generally composed of four layers of composite materials: the bottom layer, substrate layer, decorative layer and wear layer. The number of revolutions of the wear layer determines the life of the composite floor. Bottom layer: Made of polyester material, it acts as a moisture barrier. Base layer: Generally made of density board, depending on density board density, also divided into low density board, medium density board and high density board. Decorative layer: After the special paper printed with a specific pattern (mainly based on simulated solid texture) is soaked in a solution of trimerized hydrogen ammonia, after chemical treatment, the chemical properties of the paper are stabilized after the reaction is heated with a trimerized hydrogen ammonia, and no chemical reaction occurs. The characteristics of the reaction make this paper a beautiful and durable decorative layer. Wear-resisting layer: It is an anti-wear agent composed of a uniform layer of aluminum oxide on the surface of the laminate floor. The content of aluminum oxide and the thickness of the film determine the number of revolutions of wear. The number of revolutions of the wear layer containing about 30 g of aluminum oxide per square meter is about 4000 revolutions, the wear resistance number of 38 g is about 5,000 revolutions, and the abrasion resistance number of 44 g is 9000 revolutions. Around, the greater the content and film, the higher the number of revolutions, the more wearable.
The main raw materials for plastic carpets are polyvinyl chloride resins, additives such as additives and other additives.
Blended carpets are made from a mixture of wool and synthetic fibers such as nylon and nylon.
Plastic floor It is a block or coil floor made of PVC plastic. This kind of plate has elasticity, wear resistance, heat preservation, sound insulation and so on. This kind of floor uses extrusion and calendering. Plastic floor adhesives are special adhesives.
The multi-layer solid wood composite floor adopts multi-layer plywood as the base material, and the hardwood lamella panel or the slicing veneer is used as the panel, and the urea-formaldehyde resin glue is interlaced and hot-pressed, and the characteristics are basically the same as the three-layer composite floor.
Laminate flooring Laminate flooring is made of AL2O3 wear-resisting layer, decorative layer, high density of core layer and bottom moisture-proof layer. The wear-resistant layer is covered with AL2O3 on the decorative paper, requiring highly detailed AL2O3. In the process, it does not cover the patterns and colors on the decorative layer, but also the uniform surface is closely attached to the surface of the decorative layer; the decorative layer, that is, printing The paper is printed on its surface with realistic wood patterns; the core is made of HDF, HDF or premium special particle board. The laminate flooring does not need to be painted and waxed, and it is easy to install. It is a new type of environmentally-friendly floor.
Non-woven carpets use non-woven fabric manufacturing technology, that is, the raw materials are directly made into fabrics by the weaving method without the traditional spinning process.
The main raw material for pure wool carpet is rough sheep wool.
Paint coating refers to a material that coats the surface of an object and is firmly bonded to the substrate to form a complete and tough protective film. Can be divided into: oily, synthetic resin, water, powder four stages.
Varnish, also known as Van Water, is divided into two categories: oil base varnish and resin varnish. Variety of ester glue varnish, phenolic varnish, alkyd varnish, nitro lacquer and shellac varnish. Good gloss, fast film formation, wide application.
Unsaturated Polyester Piano Unsaturated Polyester Piano Lacquer is an unsaturated polyester resin based coating consisting of four components: polyester resin, accelerator, initiator, paraffin liquid. The paint is a solvent-free paint, can get a thick coating adhesion at a time, and has excellent corrosion resistance to common acids, alkalis, alcohol, tea and other liquids.
The enamel is made by varnish plus pigment grinding. Commonly used are phenolic enamel and alkyd enamels.
The original paint, also known as lead oil, is a mixture of paint and dry oil. It is used to adjust putty.
Latex paint is a kind of paint with emulsion made of petrochemical products as raw material and water as dispersion. It has no pollution to the environment, is safe and non-toxic, has no fire hazard, is easy to construct, and the coating film dries quickly. Good color retention, good air permeability and other characteristics, according to the use of points can be divided into interior wall paint and exterior wall paint, according to the gloss can be divided into low light, semi-light, high light and other varieties.
Birch birch, birch and maple birch. White birch is yellow-white, maple is light reddish brown, and wood is slightly heavier than white birch. Birch wood is slightly heavier and harder, easy to machine, and has a smooth cutting surface. It is suitable for carving and making all kinds of furniture.
Boxwood Boxwood, small and fine texture, very colorful, some egg yellow, because it is difficult, so no big material, commonly used in the production of wood comb and used for engraving, for furniture is to do more inlaid materials .
Shadow wood shadow wood, also known as "wood", its multi-section wood, shrinking into the landscape of birds and animals, some wood grain into a small grape pattern and the shape of the stems and leaves, called "full rack of grapes" . Acerola is not a specific tree species, but it refers broadly to the tumors that occur after the trees are sick.
There are three kinds of Phoebe nanmu, one is Fragrant Nan, slightly purple wood and with fragrance, the texture is also very beautiful; Second, Jin Sinan, there are gold in the wood, is the best kind of Phoebe, more rare is that Some Nanmu materials form natural landscape figures. The third is Shui Nan, which is softer and uses more of its furniture.
Rosewood rosewood has purple wood color, heavy wood, heavy water, fine texture, and endless changes.
Mahogany furniture adopts cherry wood, ebony, chicken wing wood, rosewood, rosewood (Southeast Asia) and other materials can be called mahogany furniture, furniture made of other materials is not mahogany furniture. Mahogany furniture can be divided into various mahogany furniture, mahogany furniture and mahogany furniture according to different materials.
Alder eucalyptus, brown bark, red-brown heartwood, sapwood gray, delicate texture, beautiful patterns, and not easily deformed, can be used for carving. Its outstanding feature is a strong aroma that can repel mosquitoes.
Wumu Wumu, also known as Wu Wenmu, Wu? Wood, ebony. Its wood is as solid as iron, a little like red sandalwood, the old man is pure black, bright as paint, but the output is very small. Ebony is the general name for black wood, as well as the name of “Angu-Ukraine” and “Tea Umbrella”. Its color is pure black, it is brittle, it is of solid quality, and it sinks when it enters water.
Chicken wings wood chicken wings, but also as "?? Wood" or "wood", Guangdong area called "Hainan Wenmu", but also "red bean wood" and "Acacia wood" alias. Chicken wing wood is old and new, the new chicken wing wood is rough, purple and black, the texture is muddy, and stiff and rigid, easily cracking and cracking; old chicken wing wood texture is delicate, there are purple and brown shades of crab claws, especially It is a longitudinal section, slender, resembling a chicken's wings. Chicken wing wood produces less wood than rosewood and rosewood, and its wooden texture is unique. Therefore, it is cherished by the world with its small amount of beautiful and beautiful charm.
Iron pear wood, also as "iron wood", "stone salt", "iron edge." The color of ironwood is very similar to chicken wing wood. Some chicken wing wooden furniture parts are filled with iron pear wood.
A "flower palm" of rosewood. If there is a ghost face on the wood grain, it is also a raccoon spot. The old man's pattern boxing, tender and straight lines. The wood knot pattern halo is like money, colorful, and the texture is clear and beautiful. It can be used as furniture and room furniture. Rosewood is also divided between old pear and new pear. The old pear is also called Huanghua pear. The color is from light yellow to purple red, and the texture is clear and beautiful. The wooden color of the new pear is red and yellow, and the texture color is slightly worse than that of the old pear.
Fly ash portland cement is made of portland cement clinker and fly ash, mixed with appropriate amount of gypsum and ground.
The slag portland cement is made of portland cement clinker, mixed with appropriate amount of granulated blast furnace slag and gypsum.
The pozzolanic portland cement is made by mixing ground Portland cement clinker and pozzolanic material and gypsum in proportion.
Mineral wool board Mineral wool board generally refers to the mineral wool sound-absorbing board. With granular cotton as the main raw material, other additives are added by high-pressure steam-squeezing cutting, free of asbestos, and fireproof and sound-absorbing performance is good. The surface generally has irregular holes (commonly known as: caterpillars) or micro-holes (pinholes) and the like, and the surface can be coated with various kinds of color paste (manufactured products are generally white)
VOC
VOC Directed organic compounds, including aromatic hydrocarbons (benzene, toluene, xylene), ketones and aldehydes, amines, halogenated hydrocarbons, thiohydrocarbons, unsaturated hydrocarbons and so on.
The materials used in the construction of auxiliary materials, such as wires, hardware screws, cement, and yellow sand, are difficult to calculate.
Cold Viscous Solvent Asphalt Rubber Cold Viscous Solvent Asphalt Adhesive (cold asphalt adhesive) is an asphalt adhesive formulated from petroleum asphalt, fillers, solvents (gasoline, kerosene, etc.).
This kind of cold asphalt adhesive can be conveniently constructed at normal temperature, improve working conditions, reduce environmental pollution, and can be brushed into even thin layers, saving asphalt, but the cost is high because the solvent is expensive. This glue can be used instead of hot-melt asphalt glue for coils, waterproof coatings, asphalt mortar and concrete.
Bituminous bituminous bituminous rubber (also known as bitumen mastics) is a mixture of bitumen and suitable powdered or fibrous mineral fillers, sometimes with diluents. It is mainly used for pasting waterproof membrane, asphalt waterproof coating, bottom layer of bituminous mortar waterproof layer and joint caulking material.
Stainless steel stainless steel uses chromium as the main alloying element, nickel-chromium stainless steel, nickel-drill-titanium stainless steel, etc. It is a kind of alloy steel made by adding alloying elements to carbon steel, and has excellent corrosion resistance. performance.
PPR pipe
PPR is an abbreviation of tripropylene polyethylene. It adopts hot welding and special welding and cutting tools with high reliability. The price is also very economical. Insulation performance is also very good, the wall is also very smooth, the general price of 6-12 yuan per meter (4 in charge), does not include the inner and outer wire joints.
Anti-theft door Anti-theft door is a door that can resist abnormal opening under certain conditions for a certain period of time, and has a special lock and anti-theft device.
A door that is made of planks made of panels. Strong and durable, mostly for the door.
Panel door leaf consists of skeleton and door core panels. The defender's core board can be wood board, plywood, hardboard, plastic board, glass, etc. When the door panel is glass, it is a glass door. When the core is a yarn or a louver, it is a screen door or a louver door. It is also possible to partially use glass, yarn or louvers, such as upper glass, lower louver combinations, etc. as required.
Sliding doors, windows, doors, windows, doors, doors, and doors adopt lateral movement.
The base material of the door is a medium density fiberboard. The surface of the door is affixed with a trimerized hydrogen ammonia finish that is formed by one-time bonding at high temperature and high pressure. No paint is required, and the surface is smooth and smooth, the color is bright, and it never fades.
Plastic steel doors and windows, steel doors and windows are made of hard polyvinyl chloride (PVC) plastic profiles, and are made of hardware. The profile is a porous cavity, and the main cavity has inner lining steel made of cold-rolled steel plates to increase the strength of the steel doors and windows. Profile wall thickness should be 2.5 mm or more.
The middle of the plywood door is a light frame, and the two sides are attached to plywood, fiberboard, molded board and other thin plate doors, which are generally interior doors.
The doors, windows and doors of the revolving door are opened and closed in a rotating manner. The switch window includes a top hung window, a bottom hung window, a middle hung window, an upright window, and the like.
Abrasive pressure grinding door is also called hollow door, with wood keel as the core in the middle, double-sided affixed with a embossed plywood, and polished and polished to become the flat-colored grinding door.
There are many kinds of chemical fiber carpets, such as nylon, nylon, acrylic, polypropylene, polyester carpets, etc.
It consists of a face fabric, a anti-loose coating, a primary backing, and a secondary backing. The current major varieties are polyester, polypropylene and other types. Paving can be fixed or not fixed.
The cork floor is made from the bark of a cork oak tree and is crushed and hot-pressed. Sometimes it becomes dyed parquet after bleaching. This kind of flooring features soft footfeel, good elasticity, strong sealing, and very wearable is a typical silent floor, which has a great tendency to replace the carpet. In our country, it has broad prospects for development.
Strong tile adhesive has special strong adhesive force, suitable for indoor and outdoor wall sticky towel construction of large tiles and quartz clock quartz quartz stone natural stone plates, especially for high-rise building exterior walls. For the light steel frame system plate such as plasterboard, Etna plate, plywood and other base surface paste interior tiles are good. With this type of product, ceramic tiles can be applied to low-water-absorption substrates, such as pasting tiles on old tiles and pasting tiles on solid paint surfaces. Its other feature is its flexibility, which allows the adhesive layer to withstand the effects of temperature and expansion, avoiding cracks in the tiles.
Tile adhesive cement mortar additive mixed with cement mortar can improve the bond strength and flexibility of cement sand, and can be used as interface treatment agent and tile adhesive strength agent. It can enhance the water resistance of cement mortar. It can be used in wet areas such as swimming pools, indoor kitchens, and toilets. If used in combination with strong tile adhesives, it can be used directly to paste tiles on old walls.
Jinbang board Jinbang board adopts cement, fly ash, silicon powder and perlite as main materials, and is reinforced with composite fibers, extruded by vacuum high pressure, and steam cured.
Hot Melt Asphalt Rubber Hot Melt Asphalt Adhesive is a kind of adhesive that needs to be heated by adding powdery or fibrous mineral filler to the asphalt. Asphalt should be selected as high softening bitumen to ensure high temperature weather does not flow; In order to improve its adhesion, atmospheric stability and heat resistance, under normal circumstances need to add 10-25% of alkaline mineral powder, such as talcum powder, Limestone powder, dolomite powder, etc., while the acidic medium is selected quartz powder, granite powder and other acidic mineral powder; to improve its crack resistance and flexibility need to be mixed with 5% -10% of fiber filler, commonly used as asbestos Or kapok fibers. During the preparation, the asphalt is first heated to 180-200 degrees, and then dehydrated and then hot-mixed with the heat-dried powder or fiber filler.
Hot melt asphalt glue heat resistance can be divided into S-60, S-65, S-70, S-75, S-80, S-85 six labels.
The choice of hot melt asphalt adhesive labels depends on the conditions of use, the roof slope and the extreme maximum temperature in the local calendar year.
The so-called green products of green products are products that do not pollute the environment and do no harm to human health during production and use.
Gypsum plasterboard is a building board made of gypsum as the main raw material, mixed with appropriate additives and fibers to make the board core, and special board paper is used as the protection surface. Gypsum plaster board has the characteristics of light weight, sound insulation, heat insulation, strong processing performance and simple construction method.
Gypsum board Gypsum board uses building gypsum as the main raw material. Generally, it can be mixed with lightweight aggregate, hollowed or foamed to reduce its own weight and reduce thermal conductivity; it can also be blended with fiber materials to increase tensile strength and reduce Brittle; can also be mixed with silica mineral powder or organic water repellent to improve its water resistance; sometimes the surface can be stickers or aluminum foil to increase the appearance and moisture resistance.
Gypsum board is characterized by light weight, heat insulation, non-combustible, can be sawed, nailed, sound-absorbed, humidity-adjusted and beautiful. However, poor moisture resistance.
Gypsum board is mainly used for interior wall and flat roof decoration, wall insulation, thermal insulation materials, sound-absorbing materials, and wood-based materials, etc. Color mold-sealing agent is suitable for caulking of tile, stone and other decorative materials, and has good adhesion. The strength of the joints and the crack-resistance and toughness can increase the overall disease-preventing water of the decorative panels. It also has anti-mildew features, making the face clean and hygienic, while the color decoration effect is more perfect.
The organic pre-mixed tile adhesive can be applied directly to the ceramic tiles without adding any substances. It is suitable for pasting tiles on boards, plasterboards, and Etude boards, as well as on the ceiling. It has good toughness. .
Elastic tile adhesive It can absorb and weaken the substrate due to vibration, expansion and damage to the tile bond, especially for adjacent railroads, viaducts, highways and interior decoration of buildings. At the same time, it is suitable for sticking various types of tiles and stone plates on wooden boards, high-density boards, and enamel boards, and in particular sticking ceramic tiles on wooden floors.
Cement wherever the material is ground, after adding appropriate amount of water, it becomes a plastic paste, which can be hardened in the air, hardened into a stone in water, and can be cemented with sand and other materials. Concrete materials are commonly referred to as cement.
Portland cement is a hydraulic cementitious material made of Portland cement clinker, 0-5% limestone or granulated blast furnace slag, and a suitable amount of gypsum ground. Type 2 Portland cement, type 1 Portland cement, code P.1, with less than 5% limestone or granulated blast furnace slag, not mixed with a mixture, codenamed P.2.
Portland cement clinker generally forms the following several kinds of mineral components, its chemical formula, simple form and content are as follows:
Tricalcium silicate 3CaO.SiO2, content 36-60%;
Dicalcium silicate 2CaO.SiO2, content 15-37%;
Tricalcium aluminate 3CaO.AL2O3, content 7-15%;
Tetracalcium tetracalcium 4CaO.Al2O3.Fe2O3, abbreviated C4AF, content 10-18%;
Various clinker minerals act differently when they interact with water alone.
Ordinary portland cement Ordinary portland cement (abbreviated as ordinary cement) is a hydraulic binder made from Portland cement clinker, a small amount of mixed material, and a suitable amount of gypsum. Mixing amount of mixed material in cement is calculated by weight percentage:
When mixed with active mix materials, it shall not exceed 15%, and it shall be allowed to be replaced with not more than 5% of kiln dust or not more than 10% of non-reactive mixed materials;
Do not exceed 10% with non-reactive blends.
White Portland cement White Portland cement is abbreviated as white cement. It is a hydraulic cementitious material made by adding white Portland cement clinker into gypsum and grinding. When cement is milled, it is allowed to add limestone that does not exceed 5% of the cement mass (AI.Os content <2.5% = or kiln dust (whiteness J70%) is mostly additive, and cement is allowed to add without compromising cement performance. The amount of grinding agent added must not exceed 1 % of the cement mass.
Ceramic mosaic tiles, also known as mosaic, specifications, thin, small, hard texture, acid, alkali, wear-resistant, watertight, resistant to pressure, not broken, colorful, widely used.
After polishing, the polished brick bricks become polished tiles, which are very hard and very wear-resistant.
Glazed tiles refer to tiles that are glazed on the surface of the brick. This kind of brick is divided into two types: one is made of clay, and the other is made of porcelain clay. About 80% of home decorators currently choose this brick as the floor decoration material.
Bidet
Water supply system and drainage system with spray washing, glazed ceramic sanitary equipment for washing body excretion organs. According to the washing water spray method, it is divided into direct injection, oblique spray and front and back cross spray.
Urinal (urinal)
A glazed ceramic sanitary device that is exclusively used by male urine. Wall-mounted and floor-standing.
Integrated sitting wc pan
A toilet integrated with a water tank. Its flushing pipe has siphon type and flush type.
Siphon wc pan (siphon wc pan)
Mainly by the flushing water in the drainage channel formed by the siphon effect will discharge the toilet. When flushing, positive pressure plays a role in the discharge of pollutants.
Toilet (wc pan)
A glazed ceramic hygiene device for receiving and flushing human excrement. According to the excretory site, there are points of discharge and discharge.
Wash-basin
For washing your face, wash your hands with glazed ceramic sanitary equipment. Suspended, column and benchtop.
The vortex siphon-type one-piece toilet uses a vortex formed by the flushing water flow to accelerate the siphon-type conjoined toilet bowl.
Jet siphon jet wc pan
Under the water seal is provided with a spray channel, which accelerates the discharge of water by jetting water and reduces the flush noise to a certain extent (using water seal insulation).
Wash-down wc pan (wash-down wc pan)
A toilet that directly discharges dirt by the impulse of flushing water. Its main characteristic is that only positive pressure is formed during the flushing and sewerage process, and there is no negative pressure.
Squatting wc pan
When using the human body to take the style of toilet bowl. Divided into unobstructed and sheltered; its structure has two kinds of return bends and no return bends.
The color quartz sand decorative board is made of white cement or colored cement as the cementing material, and is made of natural colored stone, colored quartz sand, or synthetic colored particles of workers as aggregates. After mixing and pouring, the water brush is used for curing and demoulding. Plate.
Water-repellent gypsum board refers to the water absorption rate of this slate when it is tested according to ASTM standards in the United States, and its water absorption rate is 5%, that is, it can be used in areas with large temperature, such as toilets, shower rooms and kitchens. The board is in the gypsum core. A quantitative water repellent is added to the material so that the gypsum has a certain waterproof property. In addition, gypsum board paper is also treated with water, so this is a better board with a wider range of uses. However, this board cannot be directly exposed to the wet environment, nor can it be directly flooded for long periods of time. Fireproofing of gypsum plasterboard means that the board retains its structural integrity (in the building structure) for a certain period of time in the event of a fire. , so as to play a role in blocking the spread of the flame. The glass fiber and other additives are added to the plate to effectively enhance the integrity of the plate in the event of fire.
High-strength gypsum dihydrate gypsum is steamed under saturated steam at 124° C. under 1.3 atmospheres, and the resulting α-type semi-hydrate gypsum is ground to obtain high-strength gypsum. Due to the formation of decomposition under higher pressure, the grains of high-strength gypsum are coarse and the specific surface area is relatively small. The plastic water requirement of the gypsum slurry is very small, about 35-45%, so the porosity after hardening is small and the strength is high. (Up to 40MPa in 7 days).
High-strength plaster is suitable for high-strength plastering works. Decorative products and plasterboards. Water repellent can be used in high humidity environments. Together with organic binders make shrink-free adhesives.
Artificial stone Artificial stone is the collective name of artificial Dali and granite. It belongs to cement concrete and polyester concrete. According to the materials, it can be divided into four categories: cement type artificial marble, resin type artificial marble, resin type artificial marble, and sintered artificial marble.
The quartzite plate is made of hydrated rock material and is made into a thin plate with its features of clear texture and easy processing. The connection method is mainly paste.
The marble pattern of marble, grey marble and grey marble is decorated with rich patterns of gray and white, and some are like the ripples of water. The common natural patterns include “waves of water ripples”, “connected with water and sky”, “great waves”, and “waves of turbulence”. "Wait. It is a fabric for the production of wall bases and living room floors.
The terrazzo prefabricated board is made of cement, sand, stone pulp and additives, and is uniformly mixed, casted, cured, polished and processed into products.
Resin synthetic stone synthetic stone, also known as artificial stone: It is mainly used as a raw material, stone mortar, stone powder, resin as a binder, after the ingredients, vibration molding, curing, surface treatment, polishing and other processes. Mainly used for wall and cylinder finishes.
Polished granite cuts the mined natural granite blocks into thin slices, and the surface is polished and polished. Its thickness is 20? about. Use it with walls or floors.
Natural marble marble is named after Dali City in Dali County, Yunnan Province, China. It is a recrystallization and metamorphism of limestone and dolomite under high temperature and high pressure, and it has a dense cryptocrystalline structure. The marble without impurities is white, also called white marble.
Natural marble has a fine texture and solid texture, so it is polished like a mirror. Compressive strength is high, up to 300MPa, small water absorption, wear-resistant and other features. The main varieties are: cloud gray marble, color flower marble.
Natural marble is a type of metamorphic rock formed by high temperature and high pressure in the earth's crust. It belongs to medium hard stone and mainly consists of calcite, limestone, serpentine and dolomite. Its main component is calcium carbonate, accounting for more than 50%. Others include magnesium carbonate, calcium oxide, manganese oxide, and silicon dioxide. Because marble generally contains impurities, and calcium carbonate in the atmosphere by the role of carbon dioxide, carbides, water, but also easy to weathering and erosion, and make the surface lose luster quickly. Therefore, a few, such as white marble, AI Yeqing, etc., which are relatively stable and durable and have less impurities, can be used outdoors, and other varieties are not suitable for outdoor use. They are generally used only for interior decorative surfaces.
天然花岗石天然花岗石是火成岩，也叫酸性结晶深成岩，是火成岩中分布最广的一种岩石，属于硬石材，由长石、石英和云母组成，其成分以二氧化硅为主，约占65%？ 75%.岩质坚硬密实，按其结晶颗粒大小可分为“伟晶”、“粗晶”和“细晶”三种。 The quality of granite depends on the composition and structure of the mineral. The fine granite has fine and uniform crystalline particles, less mica content and more quartz, and does not contain pyrite.花岗石不易风化变质，外观色泽可保持百年以上，因此多用于墙基础和外墙饰面。由于花岗石硬度较高、耐磨，所以也常用于高级建筑装修工程。
劈离砖这种砖以重粘土为主要原料，经混料、真空练泥、挤压成型、自动切割、烘干焙烧等工序制成。
陶瓷棉砖陶瓷棉砖俗称马赛克，它分为挂釉与不挂釉两种，一般多用于地面，以利于防滑。
陶瓷砖（ceramic）
由粘土或其他无机非金属原料，经成型、烧结等工艺处理，用于装饰与保护建筑物、构筑物墙面及地面的板状或块状陶瓷制品。也可称为陶瓷饰面砖（ceramic facing
tile）
玻化砖这是一种高温烧制的瓷质砖，是所有瓷砖中最硬的一种。有时抛光砖被刮出划痕时，玻化砖仍然安然无恙。
通体砖这是一种不上釉的瓷质砖，有很好的防滑性和耐磨性。 Generally referred to as "non-slip floor tiles" are mostly full bricks.
玻化砖这是一种高温烧制的瓷质砖，是所有瓷砖中最硬的一种。有时抛光砖被刮出划痕时，玻化砖仍然安然无恙。
琉璃釉面砖这种砖是在陶质胚体上涂一层琉璃釉，经1000℃烧制而成。这种材料光亮夺目，色彩鲜艳，具有民族特色。采用106胶水泥沙浆（聚合物水泥沙浆）粘贴，可以不掉落桦木生长于北半球，具有闪亮的表面和光滑的机理。 It is white, with a slightly pink ivory or grayish-yellow wood heart. It is not very durable in an easily decaying environment and is used in more splint form.如今用于结构、镶花木细工和内部框架的制作。
The melamine board melamine board full name is a melamine impregnated paper film facing artificial board. The paper is made of melamine resin adhesive soaked in paper with different colors or textures, and then dried to a certain degree of curing, and it is paved on the surface of particleboard, medium-density fiberboard or hardboard, and the hot-pressed decorative board.
Density MDF is also called fiberboard. The artificial board made of urea-formaldehyde resin or other suitable adhesives based on wood fiber or other plant fibers is classified into high-density board, medium-density board, and low-density board depending on its density. MDF is also easy to rework because of its soft and impact resistance. In foreign countries, MDF is a good material for making furniture, but due to the fact that the national standard for height plates is several times lower than international standards, the quality of use of MDF in China needs to be improved.
Blockboard blockboard row commonly known as Daxinban. Daxin board is made of two pieces of veneer and pressed and spliced ​​with wood.大芯板竖向（以芯材走向区分）抗弯压强度差，但横向抗弯压强度较高。
实才实材也就是原材，主要是指原木及原木制成的规方。 Commonly used logs include Chinese fir, red pine, Chinese ash, ash, camphor, eucalyptus, and more valuable are rosewood, eucalyptus, oak and so on.
黄花木边材浅黄，芯材黄褐。
水曲柳边材浅褐，芯材浅褐，但比边材略深。
柳木边材灰白，芯材褐色。
榆木边材浅黄褐，芯材暗灰褐。
红松边材浅黄，芯材黄透微红。
白松边材与芯材色差不大，都呈白色或浅黄；
PVC格子板是将原材料先压延成平板，在用真空成型法压制板材使鼓面变形。 This plate has a variety of three-dimensional square and rectangular grid, which is characterized by the rigidity of the plate, can absorb the stretching deformation of PVC, the unique effect of the facade, the production and installation are easy.规格一般为500mm×500mm，厚度为2—3mm.
PVC塑料板
PVC是聚氯乙烯树脂的简称，聚氯乙烯是线型热塑型聚合物。 With PVC as the base material, add plasticizers, stabilizers, pigments, fillers, lubricants, etc. At a certain temperature, kneading, mixing, pulling, pelletizing, extruding, or die-casting molding can be made into plastic products after cooling and setting.
Light steel keel gypsum board ceiling gypsum board and light steel keel combined to form a light steel keel gypsum board. Light steel keel gypsum board ceiling paper gypsum board, decorative gypsum board, fiber gypsum board, hollow gypsum board variety. From the current point of view, the use of light steel keel plaster ceilings is more of a partition wall, but less used to make smallpox.
Mirror stainless steel veneer It is a stainless steel thin plate made of special polished. Its characteristics are as bright as a mirror surface, reflectivity, deformation rate and high-level mirror almost the same, and fire-resistant, moisture-resistant, no deformation, no broken, easy installation, but should be hard material scratches.
Color coated steel plate It is made of hot-rolled steel plate and galvanized steel plate coated with 0.4-0.5mm soft or semi-rigid polyvinyl chloride plastic film. It has heat resistance and corrosion resistance and can be used as wallboard.
Calcium-plastic decorative plate Calcium-plastic decorative plate, also known as calcium-plastic foam decorative sound-absorbing board, is divided into general board and non-flammable board. This kind of decorative board is made of polyethylene resin added with inorganic fillers. It has a variety of concave and convex patterns or perforation patterns on the surface. It has the characteristics of light weight, heat preservation, sound absorption, heat insulation, insect resistance, water resistance, and small deformation, and it is beautiful in appearance. The construction is convenient, but its durability and aging resistance are slightly inferior.
Aluminum buckle aluminum buckle plate with a light aluminum stamping molding, the outer layer and then spray paint with a special process, long-term use does not fade, the construction is relatively simple, not easy to deformation, fire, moisture, anti-static, sound-absorbing sound insulation, and beautiful practical. There are two punching and flat surfaces on the surface of the aluminum pinch.
PVC波形板也称为PVC瓦楞板，一种是纵向的波形板；其宽度为900—1300mm，长度没有限制，为了运输方便一般最长为5000—6000mm；另一种是横向的波形板，其宽度为800—1500mm，
横向波形板的波幅尺寸小，可以成卷放置，每卷长度为10—30m，PVC波形板还有一些独特的波形，如折线形，弧形等。
The splint ceiling splint (also called plywood) has the advantages of light material, high strength, good elasticity and toughness, impact resistance and vibration resistance, easy processing and painting, and insulation. It can also easily create a variety of modeling ceilings such as curved, round, square, etc., but the disadvantage is that they are afraid of termites.
Gypsum board ceiling plaster ceiling is made of plaster of Paris as the main raw material mixed with additives and fibers, with light weight, heat insulation, sound absorption, flame retardant and sawing and other properties.多用与商业空间科学，一般采用600*600规格，有明骨和暗骨之分，龙骨常用铝或铁。
铝合金装饰板它又称为铝合金压型板或天花扣板，用铝、铝合金为原料，经辊压冷压加工成各种断面的金属板材，具有重量轻、强度高、刚度好、耐腐蚀、经久耐用等优良性能。 After the surface of the board has been anodized or painted and sprayed, a variety of colors required for decoration can be formed.
Gypsum board It uses gypsum as the main material, adding fibers, adhesives, and modifiers, and mixing, pressing, and drying.具有防火、隔音、隔热、轻质、高强、收缩率小等特点且稳定性好、不老化、防虫蛀，可用钉、锯、刨、粘等方法施工。广泛用于吊顶、隔墙、内墙、贴面板。 Gypsum board is divided into ordinary paper gypsum board, fiber gypsum board, gypsum board 3 kinds.
The gypsum ceiling is made of cooked plaster as the main raw material, mixed with additives and fibers, and has properties such as light weight, heat insulation, sound absorption, flame retardance, and sawability.
PVC board uses PVC as raw material, which can be waterproof, moisture-proof, and tamper-proof. It contains flame-retardant raw materials.
钢化玻璃钢化玻璃是将玻璃加热到接近玻璃软化温度（600—650℃），经迅速冷却或用化学方法钢化处理所得的玻璃制品。它具有良好的机械性能和耐热震性能。
原片玻璃经过钢化炉热处理后，改善了结构性能，使其强度提高3~5倍，可承受一定能量的外来撞击或温差变化而不破碎。即使破碎，也是整块玻璃碎成类似蜂窝状钝角小颗粒，不易伤人，从而具有一定的安全性。钢化玻璃不能切割，需要在钢化前切好尺寸，且有“自爆”特性。根据用途不同，钢化玻璃又可分为全钢化玻璃、半钢化玻璃、区域钢化玻璃、平钢化玻璃、弯钢化玻璃等多种类型。适用范围：玻璃门、高级建筑玻璃幕墙、自动扶梯围栏、电话亭及展示柜。
水晶玻璃它是采用玻璃珠在耐火模具中铸成。玻璃珠以二氧化硅和其他各种添加剂为主要原料，配料后用火焰烧熔结晶而成。其外表光滑并带有各种格式的细丝网状或仿天然石料的点缀花纹。具有良好的强度、化学稳定性和耐大气侵蚀性。其反面较粗糙，与水泥粘结性好。是一种玻璃板状装饰材料，适用与内外墙装饰。
镜面玻璃又称磨光玻璃，是用平板玻璃经过抛光后制成的玻璃，分单面磨光和双面磨光两种，表面平整光滑且有光泽。透光率大于84%，厚度为4—6mm.
热弯玻璃原片玻璃经过热弯炉加热后在靠模中成形，两片热弯玻璃可进一步复合成热弯夹层玻璃。适用范围：各种汽车前后风挡及建筑圆弧幕墙、门窗玻璃等。
玻璃砖又称特厚玻璃，有空心和实心两种。实心玻璃砖是采用机械压制方法制成空心玻璃砖是采用箱式模具压制，两块玻璃加热熔接成整体，空心砖中间充以干燥空气，经退火，侧面封严缝隙而成。
釉面玻璃釉面玻璃是在玻璃表面涂一层彩色易熔性色釉，加热至釉料熔融，使釉层与玻璃牢固结合在一起，经退火或钢化处理而

G type of fin which is used  in the industrial cooling unit , normally it is aluminum 1100 or 1060 sheet material. Aluminum coil thickness is regularly 0.3mm to 0.4mm temper HO.The fin will be wind on the extruded steel tube and made into cooling tower for heat transfer.The cooling unit is also called air cooling condenser.

Aluminum G type finstock strip is Trumony's strong product and we have exported this material to Asia,Middle East and Latin American countries.Quality feedback is very positive.Trust in Harmony.We care what our clients care.

Aluminium Stip, Aluminum Metal Strips, Aluminium Strip 1Mm, Anti Slip Aluminium Strips
Brightenlux Electric Appliance Co., Ltd http://www.szaluminumsheets.com